arch supports
home
information
about us
contact us
privacy
Shipping Information
disclaimer
return policy

Customer Service 415 504 8529

Sher™
Deluxe Nylon E-Z Post™

Arch Support Kit with adjustable heel Posts

The Sher™ Deluxe Nylon E-Z Post™ Orthotic Arch Support kit is a truly unique over the counter arch support. The Sher™ Deluxe Nylon E-Z Post™ Orthotic Arch Support kit includes one pair of full length plastic arch supports as well as three pair of posted heel wedges (each with a different level of tilt) that snap into the bottom of the heel of the plastic arch support shell. The posted heel wedge helps to support the foot by decreasing pronation beyond what the arch support alone can do.

Sher Deluxe Nylon E-Z Post full length on face up and one face down

What is a Posted Heel?
Sher Deluxe Nylon E-Z Post showing the bottom of the heel and how the heel pieces fit into the main arch support   The word “Post” refers to angling the rear part of an arch support under the heel so that the arch support tilts either inward or outward (commonly referred to as Varus or Valgus tilt). Simply put this can help to increase or decrease the level of support that a single arch support can provide. A more technical definition of what posting does is that a varus or valgus post on an arch support alters joint loading and can actually decrease the loading on the different components of the ankle, knee and hip joint. That being said a posted heel is a feature most commonly found in and associated with custom orthotics and are tailored to the specific needs of the individual patient.

Some over the counter arch supports have an intrinsic post built into them but they are not adjustable so they can not be increased or decreased. The Sher™ Deluxe Nylon E-Z Post™ offers something that no other over the counter arch support does, the ability to choose and adjust the degrees of posting and the ability to change the amount of posting over time as the body’s needs change.
The arch support shell of the Sher™ Deluxe Nylon E-Z Post™ arch support is semi rigid and is made from Polypropylene plastic. Its arch height when combined with the rigidity of the plastic is medium but with the 2 or 4 degree post the Sher™ Deluxe Nylon E-Z Post™ can work well for people with medium high to high (non weight bearing) arch heights.

The Complete Sher™ Deluxe Nylon E-Z Post™ Arch Support Kit

Sher Deluxe Nylon E-Z Post the complete arch support kit showing the arch supports and all three pair of the heel plugs

Three Sets of Heel Plugs
The three pair of heel wedges included with the Sher™ Deluxe Nylon E-Z Post™ arch supports are designed to add differing levels of medial (or lateral) posting to the arch support. The grey pair is neutral and adds no posting but it does square off the bottom of the heel so the arch support will sit more solidly in your shoes than a rounded bottom arch support. This keeps the arch support from rolling to either the medial or lateral side at any point during your stride. The blue pair has a 2 degree tilt (post) and the red pair has a 4 degree tilt (post). They also have a squared off bottom for superior stability.

Sher Deluxe Nylon E-Z Post heel plugs rear view showing the different heights

The heel post pieces of the Sher™ Deluxe Nylon E-Z Post™ snap in and out from the bottom of the arch supports. Attention must be paid to make sure that the posts are not inadvertently put in reverse position (left to right and right to left) since that will create the opposite of the desired effect. If the posting is intended to be medial posting (the most common posting) make sure that the high sides of either the red or blue posting plugs are facing inward (facing each other on the big toe side) and if the posting is intended to be lateral posting (extremely uncommon but needed sometimes) make sure that the high sides of either the red or blue posting plugs are facing outward (facing away from each other on the pinky toe side)

Sher Deluxe Nylon E-Z Post heel plugs top view

The Cushion Cover
The top cushion cover of the Sher™ Deluxe Nylon E-Z Post™ is 1/4 of an inch thick and is comprised of two different foams (glued together). The top layer of the cushion cover is Poron foam which is a high quality open celled foam that maintains its compression and rebound capacity much better than most other open celled foams and (since it is open celled) it is breathable. The bottom blue layer is Procell foam. Procell is a polyurethane based foam which is also an open celled foam and is also quite durable. These two layers of foam are toped of with a blue nylon weave top cover. The nylon top cover helps to reduce friction and keep feet cool and blister free.

These arch supports are designed for people of all arch types.
To determine your own Natural Arch Height
- Click Here -

Sher™ Deluxe Nylon E-Z Post™ - $52.95 Per Pair
Shipping
Priority Mail
For 1 pair or more USPS Market Price by weight
First Class
For 1 pair only! - $5.15& Up


Order Here
Quantity:
Size:
INTERNATIONAL ORDERS
Please select the "International Shipping" setting on the Billing & Shipping check out page for shipping outside the US.
California Sales Tax applies on orders shipped to CA destinations only.